Check that the cables between the ink supply station and the engine PCA are not damaged and are properly connected. Perform the ink delivery system diagnostic test to troubleshoot the problem further. Reconnect the power cord, then turn on the printer. Use the power switch at the rear to turn off the printer, then disconnect the power cord. Description: Front-panel-side ink supply station error.Replace the ink supply station on the service station side. In case of any damage, replace the cable.
Description: Service-station-side ink supply station error.
Perform the service station diagnostic test to troubleshoot the problem further. The cutter is on the right side of the carriage. The cutter may be blocking the carriage over the service station, preventing the service station from moving correctly. If the carriage has stopped over the service station, on the left of the printer, check that the cutter is not activated. Remove any visible obstacles (screws, plastic parts, etc.) restricting the movement of the service station. Ensure that the service station path is clear.
T3500 REMOVE SIDE PANEL HOW TO
If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the printer cannot print.įor information on how to configure this setting, see below.Ĭolor ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.īoth color ink and black ink are also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the printer. We recommend to use a new FINE cartridge in order to obtain optimum qualities.Įven when printing with one ink only, print with leaving the empty FINE cartridge installed. However the print quality may be reduced compared to when printing with both cartridges. To maintain optimal printing quality, use a FINE cartridge within six months of first use.įor Windows, if a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever ink remains, only for a while. This will cause the FINE cartridge to dry out, and the printer may not operate properly when it is reinstalled. Once a FINE cartridge has been installed, do not remove it from the printer and leave it out in the open. Installing a used FINE cartridge may cause the nozzles to clog.įurthermore, with such a FINE cartridge, the printer will not be able to inform you when to replace the FINE cartridge properly. Use a new FINE cartridge for replacement. Do not leave the printer with the FINE cartridge removed. If you remove a FINE cartridge, replace it immediately.
0 kommentar(er)
